You have no items in your shopping cart.
Subtotal: MKD 0.00
Details
The RP-DC50 charger can support two different battery plates at the same time. This allows you to mix and match the batteries. For example, you can charge one L-series battery at the same time you are charging an LP-E6 battery.
The LCD screen provides a clear display of the charging status, and the backlight enables reading the display even in the dark.
Intelligent charging systems such as Constant current/constant voltage (CC/CV) charging mode where the charger CPU automatically adjusts charging current to be lower than the max charging current that the battery can accept to protect the battery from being overcharged. Intelligent Control MCU can automatically identify the voltage and number of batteries that are on the charger, and prevent overcharge depending of the charging mode that is selected.
Boost Charging is available at the push of a button to engage a high-speed charging mode. In standard charging mode the current power is 1A per one slot and 0.5A for both slots. In high-speed charging mode, the charger provides 1.5A current per one battery slot or 0.8A for both battery slots. When Boost mode is activated the Boost icon will be displayed. Please note that Boost mode is only recommended for use with batteries that have internal overcharge/overheating protection.
The charger will automatically adjust its charge voltage to match the attached batteries.
The charger can be powered by the included AC adapter, or the included car lighter power cord. Please note that to charge 14 VDC batteries (or higher), you need to power the charger via the AC power cord.
Please note that the USB power port is only active when the charger is in standard mode, and it is disabled when the charger is in Boost mode.
Additional Information
| Brand | Hahnel |
|---|
